Farm Fence Installation in Eau Claire, WI
Built for Chippewa Valley Livestock, Pastures, and Rural Acreage
Stoney Oak Fence | E6816 County Rd B, Colfax, WI 54730 | (715) 578-8855
LIVE STATUS: Currently accepting new farm and agricultural projects — same-day response guaranteed.
10-Year Workmanship
Warranty
AFA
Certified
Licensed
& Insured
American-Made
Materials
Farm Fence Installation in Eau Claire, WI — Built for Working Land
Farm fencing is not one-size-fits-all. What holds cattle won’t safely contain horses. What works for rotational grazing won’t hold up under constant pressure along a high-traffic fence line.
Stoney Oak Fence installs agricultural fencing across Eau Claire County and the surrounding Chippewa Valley, working on everything from large dairy operations outside Chippewa Falls to equine properties near Menomonie and hobby farms around Altoona and Elk Mound. Based in Colfax, we operate in the same soil conditions our clients manage—clay-heavy ground that shifts through winter and demands proper post depth from the start.
Farm Fence Types for Chippewa Valley Properties
We install agricultural fencing systems based on how your land is used and what you need to contain:
High-tensile wire fencing
Common for large pasture perimeters and rotational grazing systems across Eau Claire County
Woven wire fencing
Used for sheep, goats, and mixed livestock, where tighter spacing prevents escape
Board fence (post and rail)
Preferred for horse paddocks and high-visibility areas near homes or barns
Barbed wire fencing
Used for cattle on large acreage where durability and coverage matter
Electric fencing systems
Poly wire and post setups for paddock division and grazing control
Other farm fence options we install:
✓Cattle panels for small pens and goat/pig enclosuresridor
✓Electric fence components (poly wire, post and wire for rotational grazing paddock division)
✓Lane fencing for barn-to-pasture corridors
✓Deer exclusion fencing (6-foot woven wire for garden and orchard protection)
✓Combination fencing (woven wire base with high-tensile top strand for mixed-use pastures)
Post Specs and Materials Built for Wisconsin’s Frost
The biggest reason farm fences fail in the Chippewa Valley is that posts are set too shallow. Eau Claire County’s frost depth runs to 48 inches — and on clay-heavy parcels, ground movement through a hard winter will push a post set at 24 inches completely out of the ground by April.
We drive line posts to a minimum of 48 inches. Corner and brace posts for high-tensile systems go deeper — 54 to 60 inches — because tension loads compound the forces the soil is already applying. A brace post at 42 inches in Chippewa County clay will creep. One at 54 inches won’t.
Materials for ground contact in Wisconsin:
Pressure-treated wood posts
UC4B ground-contact rated minimum for all farm fencing.
Steel T-posts
Galvanized for line post spacing on wire runs; not suitable for corner/brace positions.
Steel tube posts
For high-load applications like gate posts and corner braces on long high-tensile runs.
All wire materials we install are American-made.
Wisconsin Farm Fence Law: What Chippewa Valley Landowners Need to Know
Agricultural fencing in Wisconsin is governed by Chapter 90 (partition fence law).
Shared fences
Both neighboring landowners are generally each responsible for maintaining half of a shared partition fence.
Livestock owner’s burden
If you keep livestock and your neighbor does not, Wisconsin law places the full responsibility for the shared fence on you.
Written agreements
Neighbors can enter a written partition fence agreement that specifies which sections each owner maintains. That agreement binds future owners of the land, too.
Disputes
Wisconsin towns appoint “fence viewers” — local officials who inspect and rule on the condition of partition fences and the allocation of costs when neighbors disagree.
Before any digging: Call Diggers Hotline at 811 at least three business days before breaking ground. Wisconsin’s underground utility locate service is free and required by law.
Permits for agricultural fencing: Standard farm and perimeter fencing in rural Wisconsin townships generally does not require a building permit. Always check with your town clerk if you’re unsure about your specific parcel.
For more on Wisconsin partition fence law: Wisconsin Statutes Chapter 90
How We Install Farm Fence in the Chippewa Valley
Farm fencing requires a different approach from residential work due to scale, terrain, and soil movement.
1
Layout and line verification
We confirm fence alignment against existing markers or survey references before installation begins.
2
Brace system installation
Corner and H-brace assemblies are installed first, providing structural support for the full fence run.
3
Post installation based on soil conditions
Clay-heavy ground around Eau Claire requires deeper placement than sandy areas closer to river corridors.
4
Wire installation and tensioning
High-tensile systems are tensioned to match the application, ensuring long-term stability.
5
Final walkthrough
We check alignment, tension, and overall layout before completing the project.
Most farm fence installations run 3 to 10 days, depending on acreage and terrain.
High-Tensile vs. Woven Wire: Choosing the Right Farm Fence
| High-Tensile Wire | Woven Wire (Field Fence) | |
|---|---|---|
| Best livestock | Cattle, horses (smooth wire), large-animal perimeters | Goats, sheep, pigs, mixed small-to-medium livestock |
| Post spacing | 15–20 feet between line posts | 8–12 feet between line posts |
| Cost | $ (economical for long runs) | $$ (more material and closer post spacing) |
| Flexibility | Handles ground movement and freeze-thaw better | More rigid; fixed-knot pattern resists animal push-out |
| Lifespan (Chippewa Valley) | 20–30 years with proper brace installation and occasional re-tensioning | 15–25 years depending on gauge |
Cost context: High-tensile wire is the most economical option for large perimeters ($); woven wire runs $$; board fence and vinyl ranch rail run $$$ due to material cost and labor. Financing options are available.
Farm Fence Maintenance in the Chippewa Valley
Post-winter inspection — do this in April, before you put livestock back on pasture
Walk the fence line and look for posts that moved over winter. Wire tension on high-tensile runs also loosens when posts move; re-tension before the grazing season starts.
Brace post check — the most important inspection point
Check that H-brace diagonal braces are still tight and the brace post hasn’t rotated.
Electric fence vegetation management — late May and again in August
Vegetation grounding out an electric fence neutralizes it. Mow or spray the fence line twice a season to keep ground contact minimal.
Wood post and board fence — check fasteners after the first full winter
Boards can loosen at the nail. Walk the fence in spring and hammer any boards that have separated from posts.
Woven wire — watch the bottom wire height
Bottom wire resting on the ground traps moisture and accelerates corrosion at the contact points.
Get Your Farm Fence Quote: Stoney Oak Fence Serves the Entire Chippewa Valley
Chippewa Valley farms and rural properties deserve a fence contractor who actually knows the land. Stoney Oak Fence is based in Colfax, licensed and AFA-certified, and has installed agricultural fencing across Eau Claire, Chippewa Falls, Menomonie, Bloomer, Boyceville, and the surrounding farming communities of western Wisconsin.
5.0 stars across 39 Google reviews. 500+ fences installed. Owner Ryan Stein on every job site.
Stoney Oak Fence | E6816 County Rd B, Colfax, WI 54730 | (715) 578-8855
Flexible financing options available.
Chippewa Valley Farm Fence FAQ
How much does farm fence installation cost in the Chippewa Valley?
Farm fence cost depends on fence type, acreage, and terrain — high-tensile wire is the most economical at $ per linear foot, woven wire runs $$, and board fence or vinyl rail runs $$$ per linear foot. Contact us for a free on-site estimate.
How long does farm fence installation take in Eau Claire County?
Most farm fence installations run 3 to 10 days depending on total linear footage, fence type, and site conditions. We confirm a project timeline during the estimate.
Do I need a permit for a farm fence in Wisconsin?
Standard agricultural fencing on rural parcels in Wisconsin generally does not require a building permit. If your parcel is partially within a city or village boundary, or if the fence is close to a road right-of-way, check with your town or county clerk before starting.
What fence type is best for horses in the Chippewa Valley?
Board fence (post and rail) or vinyl ranch rail are the safest options for horses; smooth high-tensile wire works for large paddocks if maintained properly. Barbed wire is not safe for horses. We typically recommend 4-rail board fence for paddocks and smooth high-tensile for large pasture perimeters.
How do farm fence posts hold up in Eau Claire County’s winters?
Posts set at a minimum of 48 inches — Eau Claire County’s frost depth — hold through Wisconsin winters without heaving; posts set shallower will move. We set all line posts to at least 48 inches and brace posts to 54 to 60 inches for high-tensile systems.
What warranty does Stoney Oak Fence offer on farm fence installations?
Our farm fence installations carry a 1-year workmanship warranty. If a post we set moves or a connection we made fails within the warranty period, we come back out. Contact us at (715) 578-8855 with any warranty questions.
Areas We Serve — Farm and Agricultural Fence Installation
- Eau Claire, WI — largest market in our service area; dairy and equine operations throughout Eau Claire County
- Chippewa Falls, WI — active agricultural corridor west toward Colfax; dairy and beef cattle common
- Colfax, WI — our home base; surrounded by working farms in Chippewa County
- Menomonie, WI — Dunn County dairy and livestock operations; strong agricultural base
- Bloomer, WI — rural Chippewa County with active livestock farms and pasture land
- Boyceville, WI — small farming community; hobby farms and acreage properties
- Elk Mound, WI — rural residential and small agricultural parcels along the Chippewa Valley corridor
- Altoona, WI — Eau Claire metro area; rural-edge properties and larger lots
- Hudson, WI — St. Croix County; rural acreage and equine properties
- New Richmond, WI — western St. Croix County; mixed agricultural and rural residential